MORPH3D
On request · minimum volume Carbon fibre

PAHT-CF

High-temperature nylon + carbon fibre

High-temperature nylon with carbon fibre. Better interlayer adhesion, keeps its properties even when wet and is the toughest of the family.

Get a quote in PAHT-CF Chat on WhatsApp
Material PAHT-CF HDT 194 °C

Example part drawn layer by layer. The colour is illustrative and is not a material property.

Properties

PAHT-CF data

Property Value Standard / condition
HDT at 0.45 MPa 194 °C ISO 75
HDT at 1.8 MPa 170 °C ISO 75
Tensile strength, XY plane 92 MPa ISO 527
Tensile strength, between layers (Z) 47 MPa ISO 527
Flexural modulus, XY plane 4,230 MPa ISO 178
Unnotched Charpy impact 57.5 kJ/m² ISO 179, XY plane
Water absorption 0.88 % Saturation at 25 °C and 55 % RH
Density 1.06 g/cm³ —

Source of the values: Official Bambu Lab technical data sheet (TDS), specimens with 100 % infill.

Temperature

HDT side by side.

One scale from 0 to 300 °C, HDT at 0.45 MPa. The material on this page is in orange.

  1. PLA ~55 °C
  2. PETG ~70 °C
  3. PETG-CF 74 °C
  4. ABS 85–95 °C
  5. ABS-GF 99 °C
  6. ASA-CF 110 °C
  7. PA6-GF 182 °C
  8. PA6-CF 186 °C
  9. PAHT-CF 194 °C
  10. PET-CF 205 °C
  11. PPA-CF 227 °C
  12. PPS-CF 264 °C

Engineering materials: HDT at 0.45 MPa (ISO 75), Bambu Lab data sheet. PLA, PETG and ABS: typical reference value; where the guide gives a range, the bar marks the lower bound.

Suited for

  • Machining jigs and fixtures
  • Low-run injection moulds
  • Low-volume production

Watch out for

  • Does not resist acids and alkalis
  • Costs more than PA6-CF

Chemistry

Resists most oils and greases.

Availability and lead time

On request: we buy the lot for your order.

Process

Nozzle
260–290 °CHardened nozzle
Bed
80–100 °C
Chamber
45–60 °C
Drying
80 °C · 8–12 h
Hardened steel nozzleCarbon and glass fibres wear down a brass nozzle. We produce these materials only with a hardened nozzle.
Mandatory dryingAll are oven-dried before printing and stored below 20 % RH. Nylons lose properties if printed wet.

How to order a material on request

  1. Send the file and describe the useLoad and load direction, working temperature, environment (oil, chemicals, sun, humidity).
  2. We confirm the material and minimum volumeThese materials are not kept in stock: we buy the lot for your order. The minimum volume depends on the material and the size of the part.
  3. Lead time includes purchasing and drying the materialAdd the filament restocking to the normal production lead time of 24 h to 96 h.

Also on request: unfilled ASA (outdoor use, without the extra stiffness of carbon) and TPU in 85A and 98A hardnesses.

Production
24 h to 96 hplus purchasing and drying the material
Minimum order
R$ 80starting at 1 part · NF-e 55
Tax invoice
NF-e model 55on every order
Frequently asked questions

What people usually ask about PAHT-CF.

Still have a question? Message us on WhatsApp

How heat-resistant is PAHT-CF?
HDT is 194 °C at 0.45 MPa and 170 °C at 1.8 MPa (ISO 75), measured on specimens with 100 % infill, according to the official Bambu Lab data sheet. It is a reference value for comparing materials: the real part varies with orientation, infill and wall thickness.
Is PAHT-CF kept in stock?
No. It is an engineering material on request: we buy the lot for your order, and the minimum volume depends on the material and the size of the part. The lead time includes purchasing and drying the material, added to the normal production lead time of 24 h to 96 h.
How is PAHT-CF printed?
Only with a hardened nozzle: carbon and glass fibres wear down a brass nozzle. The process is nozzle at 260–290 °C, bed at 80–100 °C and chamber at 45–60 °C. The filament is oven-dried (80 °C · 8–12 h) before printing and stored below 20 % RH.
What are the limits of PAHT-CF?
Does not resist acids and alkalis. Costs more than PA6-CF.
Are the PAHT-CF values guaranteed?
No. Real parts vary with orientation, infill, wall thickness and material condition, and the values are not guaranteed or certified. For critical applications (safety, structural load, food contact or medical use), validate the part in your application before series production.
Compare

Related materials.

PA6-CFHDT 186 °C · Tensile XY 102 MPa PET-CFHDT 205 °C · Tensile XY 74 MPa PA6-GFHDT 182 °C · Tensile XY 75 MPa

See all materials

Get started

Send your file and get a quote the same business day.

Minimum order of R$ 80, starting at 1 part. STL, STEP or 3MF — takes 2 minutes.

Request a quote WhatsApp us directly