TPU 95A
Thermoplastic polyurethane. Flexible like hard rubber, resistant to abrasion, tearing and oil.
Material TPU 95A Tap the part Hardness Shore 95A
Example part drawn layer by layer. The colour is illustrative and is not a material property.
TPU 95A data
| Property | Typical reference value |
|---|---|
| Density | 1.20–1.22 g/cm³ |
| Hardness | Shore 95A |
| Tensile strength (printed) | 25–35 MPa |
| Elongation at break | > 300 % |
| Continuous use | up to ~60 °C |
| Nozzle / bed | 220–240 / 30–60 °C |
Source of the values: Typical reference ranges, compiled from datasheets from several manufacturers and from the literature.
Suited for
- Non-critical gaskets and seals
- Bump stops, non-slip feet, dampers
- Covers and protectors
- Flexible belts and couplings
Avoid when
- Pressure sealing (porosity between layers)
- Tight dimensional tolerance
- Geometry with a lot of support
Other hardnesses
- 85A (softer) and 98A (firmer) on request
- Slower to produce than rigid materials
In stock, no wait for purchasing.
Production
24 h to 96 hdepending on volume and material
Minimum order
R$ 80starting at 1 part · NF-e 55
Tax invoice
NF-e model 55on every order
What people usually ask about TPU 95A.
Still have a question? Message us on WhatsApp
How heat-resistant is TPU 95A?
The guide indicates continuous use up to ~60 °C.
Is TPU 95A kept in stock?
Yes. TPU 95A is one of the four materials kept in stock (PLA, PETG, ABS and TPU 95A). Production takes 24 h to 96 h, depending on volume and material, and the minimum order is R$ 80, starting at 1 part.
How is TPU 95A printed?
Nozzle at 220–240 °C and bed at 30–60 °C. Production is slower than for rigid materials.
When should I avoid TPU 95A?
Pressure sealing (porosity between layers). Tight dimensional tolerance. Geometry with a lot of support.
Are there other TPU hardnesses?
Yes: 85A (softer) and 98A (firmer), on request.
Are the TPU 95A values guaranteed?
No. Real parts vary with orientation, infill, wall thickness and material condition, and the values are not guaranteed or certified. For critical applications (safety, structural load, food contact or medical use), validate the part in your application before series production.
Related materials.
Get started
Send your file and get a quote the same business day.
Minimum order of R$ 80, starting at 1 part. STL, STEP or 3MF — takes 2 minutes.